***Available Early October 26 – pre orders available***

A discreet exhaust grille designed to disappear into the ceiling

The InvisaVent Plaster-In Exhaust Grille provides a clean, architectural alternative to conventional plastic exhaust fan grilles. Designed to be set into the plasterboard and trowelled flush with the surrounding ceiling, InvisaVent creates a streamlined finish with minimal visible hardware.

Once installed, the centre cover and surrounding surface can be painted to match the ceiling, allowing the grille to blend naturally into the room while maintaining the ventilation opening required by the exhaust system.

Available with either a 150mm or 200mm duct connection, InvisaVent is suitable for bathrooms, ensuites, powder rooms, toilets, laundries and other internal areas requiring a discreet ventilation solution.

Designed to blend in—not stand out

Traditional exhaust grilles can interrupt an otherwise carefully designed ceiling. InvisaVent replaces the familiar plastic grille with a flush, square architectural feature that can be colour-matched to its surroundings.

The plaster-in perimeter is installed before the final ceiling finish. Joint compound is applied over the perforated edges, creating a smooth transition between the grille and the plasterboard. Once sanded and painted, only the clean central panel and narrow ventilation shadow line remain visible.

The result is a refined finish suited to contemporary homes, apartments, renovations and architecturally designed interiors.

Key features

• Plaster-in, trowel-finish design
• Available in 150mm and 200mm duct options
• Manufactured from durable 304 stainless steel
• Protective powder-coated finish
• Can be painted to match the surrounding ceiling
• Clean square appearance with a discreet ventilation gap
• Removable centre cover for access and maintenance
• Suitable for new builds and renovation projects
• Designed for installation into plasterboard ceilings
• Ideal for bathrooms, ensuites, WCs and laundries
• Supplied with mounting bracket/template
• Supplied with Stainless steel duct clamp

304 stainless steel construction

InvisaVent is manufactured from 304-grade stainless steel, providing a strong and durable alternative to lightweight plastic ventilation grilles.

The stainless steel components are powder-coated to provide a consistent finish and a suitable surface for painting. This makes InvisaVent particularly well suited to bathrooms, laundries and other internal areas where durability and moisture resistance are important.

Paint it to match the ceiling

InvisaVent can be finished in the same ceiling paint used throughout the room.

After the grille has been installed, trowelled and sanded, the visible surfaces can be painted to match the surrounding plasterboard. This reduces visual interruption and helps the grille become part of the ceiling rather than appearing as a separate accessory.

For the best result, follow the paint manufacturer’s preparation and application instructions. Avoid excessive paint build-up around the ventilation gap or removable cover.

Two duct sizes available

InvisaVent 150

The 150mm duct model is designed for ventilation systems using a 150mm duct connection. It is well suited to residential bathrooms, ensuites, powder rooms, toilets and laundries where a compact plaster-in grille is required.

InvisaVent 200

The 200mm duct model provides a larger duct connection for ventilation systems designed around 200mm ducting.

The correct size should be selected to match the exhaust fan, ductwork and ventilation design specified for the installation.

How InvisaVent is installed

InvisaVent is designed to be incorporated into the ceiling during the plastering and finishing process.

1. Position the supplied installation template in the required ceiling location.
2. Mark the central cut-out and fixing positions.
3. Cut the plasterboard opening and fixing points.
4. Insert the Mounting bracketbehind the opening – if alongside a truss the edge can be folded up 90 degrees
5. Install the rear bracket and secure the plaster-in frame.
6. Connect the ductwork and screw back the rear duct plate.
7. Trowel joint compound over the perforated perimeter.
8. Sand and paint the grille to match the surrounding ceiling.
9. Install the removable centre cover into the retaining slots.

Installation should be completed by appropriately qualified trades and coordinated with the exhaust fan, electrical and ducting requirements of the project.

Suitable applications

InvisaVent can be used in a wide range of residential and light-commercial interiors, including:

• Bathrooms
• Ensuites
• Powder rooms
• Toilets and WCs
• Laundries
• Dressing rooms
• Apartments
• Luxury homes
• Renovations
• Hotels and accommodation projects
• Architecturally designed interiors

A cleaner ceiling finish

InvisaVent is ideal for projects where lighting, air-conditioning grilles and ventilation outlets are carefully coordinated.

Its square form works particularly well alongside square downlights, access panels and other architectural ceiling elements. The grille can also be positioned in line with lighting or cabinetry to produce a more considered and symmetrical ceiling layout.

Unlike a standard clip-in plastic grille, the plaster-in frame becomes integrated with the ceiling finish, creating a permanent and professional appearance.

Maintenance and access

The centre panel is removable, allowing access to the internal grille and duct connection for inspection and cleaning.

To maintain airflow, periodically check that the ventilation opening is free from dust build-up.

Frequently asked questions

Can InvisaVent be painted?

Yes. The powder-coated surface can be painted to match the surrounding ceiling. Appropriate surface preparation and a compatible paint system should be used.

Is it made from plastic?

No. InvisaVent is manufactured from 304 stainless steel and finished with a powder-coated surface.

What duct sizes are available?

InvisaVent is available with either a 150mm or 200mm duct connection.

Can it be installed into an existing ceiling?

It may be suitable for renovation installations where there is sufficient access for the duct connection, rear mounting components and plaster finishing. Installation requirements should be assessed before the ceiling is cut.

Is the centre cover removable?

Yes. The centre cover can be removed to provide access for inspection, cleaning and maintenance.

Can it be used in a bathroom?

Yes. InvisaVent is designed for interior ventilation applications such as bathrooms, ensuites, powder rooms, toilets and laundries.

Does InvisaVent include the exhaust fan?

The grille is designed to form part of a ducted ventilation system. Confirm the supplied components and fan requirements for the selected product configuration before installation.